Someone know the mount for this lens?

Discussion in 'Adapted Lenses' started by Synomis192, Jun 23, 2013.

  1. Synomis192

    Synomis192 TalkEmount Regular

    141
    May 26, 2013
    I was digging through my family's garage to find this little gem. It came from a Cine-Kodak Medallion 8 film video camera (I'm guessing it uses Super 8 film) My dad said it was his before, but film was too expensive in the Philippines so he only had the chance to use it.

    Well, I found out that the lens could be unscrewed and I was wondering if I could mount this lens on the NEX

    It's a Kodak Cine Ektanon 13mm f/1.9

    I'll attach some pictures once they're done uploading from Flickr :D
     
  2. Synomis192

    Synomis192 TalkEmount Regular

    141
    May 26, 2013
  3. Synomis192

    Synomis192 TalkEmount Regular

    141
    May 26, 2013
  4. xXx1

    xXx1 TalkEmount All-Pro

    Jan 15, 2013
    It looks lot like C-mount but it is difficult to be sure. C-mount has diameter of one inch.
     
  5. Synomis192

    Synomis192 TalkEmount Regular

    141
    May 26, 2013
    I don't think so, here's a size comparison of the Kodak and an MD 50/1.7
    photo 1 (2).JPG photo 2 (2).JPG
     
  6. Bimjo

    Bimjo Super Moderator

    Oct 28, 2011
    Washington State
    Jim
    I seriously doubt the image circle from that lens will cover a APS-C sensor, especially if it's off a Super 8 camera. Looks cool though. ;)
     
  7. xXx1

    xXx1 TalkEmount All-Pro

    Jan 15, 2013
    I think that MD mount is a bit wider than 42 mm (most bayonets take 42 mm lenses) and that Kodak seems to be much smaller than 25 mm in comparison. Some proprietary mount then.
     
  8. Synomis192

    Synomis192 TalkEmount Regular

    141
    May 26, 2013
    That's true, haha well that's okay I think I can fashion something out of this lens.